Embedded Hardware/Firmware Design

Oehler Research
Instrumentation Engineer (Contract)
Project/Program Lead Ballistic Instrumentation

Developed system specification, designed the hardware (Signal Conditioning and MPU interface logic), and developed the embedded software (C++) for Oehler Research’s System 85 Ballistic Instrumentation System and Model 36 Chronograph.

Freescale Semiconductor (Motorola SPS)
Senior Engineering Specialist
Project Lead I/O Design

In this position I supported the development of the IP (Intellectual Property), and the I/O circuitry supporting the Imaging Systems, Industrial Control, and Automotive and Transportation Groups.

Senior Engineer
Process and Design Library Qualification

In this position I supported the development, qualification and distribution of the Standard cell and I/O DDK design libraries.

Senior Electrical Failure Analyst
Test and Fault Isolation

Purposed developed and implemented a plan to replace the use of an applications development PCB boards to provide the stimulus need to isolate a failures to one centered on the use of a low cost turn-key digital test system.

I was responsible for all aspects of this program. This ranged from tester selection through the design of the interface to the micro-probe station to the software development (C) of the ATPG (Automated Test Program Generation) software.

General Dynamics Fort Worth Division
Senior Design Engineer

Responsibilities systems integration, SRU/LRU functional test and verification.